Förderketten der SS M-Serie und mit Anbauteilen
Förderkette (M-Serie)
| GL-Kette Nr | Tonhöhe | Rollendurchmesser | Buchsendurchmesser | Breite zwischen Innenplatten | Pin-Abmessung | Plattenabmessung | Ultimative Zugfestigkeit | ||||
| P | d1 | d4 | d5 | d3 | b1 | d2 | L | h2 | T | Q | |
| min | max | max | max | min | max | max | max | max | min | ||
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | KN | |
| SSM20 | *40,0 50 63 80 100 125 160 | 25.00 | 12.50 | 32.00 | 9.00 | 16.00 | 6.00 | 35.00 | 19.00 | 2,50 | 14.00 |
| SSM28 | *50,0 63 80 100 125 160 200 | 30.00 | 15.00 | 36.00 | 10.00 | 18.00 | 7.00 | 40,00 | 21.00 | 3,00 | 19.60 |
| SSM40 | 63 80 100 125 160 200 250 | 36.00 | 18.00 | 42,00 | 12.50 | 20.00 | 8.50 | 45,00 | 26.00 | 3,50 | 28.00 |
| SSM56 | *63,0 80 100 125 160 200 250 | 42,00 | 21.00 | 50,00 | 15.00 | 24.00 | 10.00 | 52,00 | 31.00 | 4.00 | 39.20 |
| SSM80 | 80 100 125 160 200 250 315 | 50,00 | 25.00 | 60,00 | 18.00 | 28.00 | 12.00 | 62,00 | 36.00 | 5.00 | 52,00 |
| SSM112 | *80,0 100 125 160 200 250 315 400 | 60,00 | 30.00 | 70,00 | 21.00 | 32.00 | 15.00 | 73,00 | 41.00 | 6.00 | 72,80 |
| SSM160 | *100,0 125 160 200 250 315 400 500 | 70,00 | 36.00 | 85,00 | 25.00 | 37.00 | 18.00 | 85,00 | 51,00 | 7.00 | 104,00 |
| SSM224 | *125,0 160 200 250 315 400 500 630 | 85,00 | 42,00 | 100,00 | 30.00 | 43.00 | 21.00 | 98,00 | 62,00 | 8.00 | 134,40 |
| SSM315 | *160,0 200 250 315 400 500 630 | 100,00 | 50,00 120,00 | 36.00 | 48.00 | 25,00 112,00 72,00 10,00 | 189,00 | ||||
| SSM450 | 200 250 315 400 500 630 800 | 120,00 | 60,00 | 140,00 | 42,00 | 56,00 | 30.00 | 135,00 | 82,00 | 12.00 | 270,00 |
Förderkette mit Befestigung (M-Serie)
| GL Kettennr | P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| SSM20 | 40,0 | - | 14.0 | ||||
| 50,0 | - | 14.0 | |||||
| 63,0 | 20.0 | 35,0 | 6.6 | 27.0 | 40,0 | 16.0 | |
| 80,0 | 35,0 | 50,0 | |||||
| SSM28 | 50,0 | - | 20.0 | ||||
| 63,0 | - | 20.0 | 9.0 | 32,0 | 47,0 | 20.0 | |
| 80,0 | 25.0 | 45,0 | |||||
| 100,0 | 40,0 | 60,0 | |||||
| SSM40 | 63,0 | - | 31.0 | ||||
| 80,0 | 20.0 | 45,0 | |||||
| 100,0 | 40,0 | 60,0 | 9.0 | 35,0 | 50,0 | 25.0 | |
| 125,0 | 65,0 | 85,0 | |||||
| SSM56 | 63,0 | - | 22.0 | ||||
| 80,0 | - | 30.0 | |||||
| 100,0 | 25.0 | 50,0 | 11.0 | 44,0 | 61,0 | 30.0 | |
| 125,0 | 50,0 | 75,0 | |||||
| 160,0 | 85,0 | 110,0 | |||||
| SSM80 | 80,0 | - | 30.0 | ||||
| 100,0 | 25.0 | 50,0 | |||||
| 125,0 | 50,0 | 75,0 | 11.0 | 48,0 | 65,0 | 35,0 | |
| 160,0 | 85,0 | 110,0 | |||||
| 200,0 | 125,0 | 150,0 |
Material: Edelstahl der Serie 300.400.600
Verfügbares Rollenmaterial: POM, PA6
| GL-Kette Nr | P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| SSM112 | 80,0 | 一 | 28.0 | ||||
| 100,0 | 一 | 40,0 | |||||
| 125,0 | 35,0 | 65,0 | 14.0 | 55,0 | 80,0 | 40,0 | |
| 160,0 | 65,0 | 95,0 | |||||
| 200,0 | 100,0 | 130,0 | |||||
| SSM160 | 100,0 | - | 30.0 | ||||
| 125,0 | 25.0 | 50,0 | |||||
| 160,0 | 50,0 | 80,0 | 14.0 | 62,0 | 85,0 | 45,0 | |
| 200,0 | 85,0 | 115,0 | |||||
| 250,0 | 145,0 | 175,0 | |||||
| SSM224 | 125,0 | 一 | 35,0 | ||||
| 160,0 | 一 | 60,0 | |||||
| 200,0 | 65,0 | 100,0 | 18.0 | 70,0 | 100,0 | 55,0 | |
| 250,0 | 125,0 | 160,0 | |||||
| 315,0 | 190,0 | 230,0 | |||||
| SSM315
| 160,0 | 一 | 35,0 | ||||
| 200,0 | 50,0 | 85,0 | |||||
| 250,0 | 100,0 | 140,0 | 18.0 | 80,0 | 115,0 | 65,0 | |
| 315,0 | 155,0 | 190,0 | |||||
| 400 | 155,0 | 205,0 |
Die M-Serie ist zum am häufigsten verwendeten europäischen Standard geworden. Diese ISO-Kette ist von SSM20 bis SSM450 erhältlich. Die Serie wird daher den meisten mechanischen Handhabungsanforderungen gerecht. Obwohl diese Kette mit DIN 8165 vergleichbar ist, ist sie nicht mit anderen Präzisionsrollenkettennormen austauschbar. Er ist mit Standard-, großen oder Flanschrollen erhältlich und wird auch häufig in Buchsenform verwendet, insbesondere beim Holztransport. Es ist auch Kohlenstoffstahl erhältlich.